Robot gift store
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger
  • Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger

Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger

Makeblock Me Ultrasonic Sensor V3.0 for mBot and mBot Ranger. Ideal for distance measurement and obstacle avoidance in robotics projects. Easy RJ25 connection.

sort by color:
Makeblock Ultrasonic Sensor V3.0 – Obstacle Avoidance and Detection Component for mBot Ranger

Product Description


Ultrasonic Sensor

Automatic obstacle avoidance made simple

The ultrasonic module is an electronic component designed for distance measurement, with a range of 3 cm to 400 cm. It can be used to help a robot vehicle avoid obstacles or to support other projects that require distance sensing.


In the ultrasonic module, the ultrasonic transmitter emits ultrasonic waves in a certain direction and starts timing at the same time. The ultrasonic waves propagate in the air, and upon encountering an obstacle along the way, they immediately bounce back. The ultrasonic receiver stops timing immediately upon receiving the reflected waves. Given that the propagation speed of sound waves in the air is 340 m/s, the distance $s$ from the emitting point to the obstacle can be calculated based on the time $t$ recorded by the timer, which is: $s = 340 \text{ m/s} \times t / 2$.

Wiring Method

RJ25 Connection

Since the module interface is marked in yellow, it must be connected to a port on the main control board that also bears a yellow label when using an RJ25 connection. Taking the Makeblock Orion as an example, it can be connected to ports 3, 4, 5, 6, 7, or 8, as shown in the figure.



Dupont Wire Connection

When using Dupont wires to connect to the Arduino Uno mainboard, the SIG pin of the module needs to be connected to a DIGITAL pin, as shown in the figure below.


Product parameters

Parameter Description


  • Features reverse connection protection; reverse power connection will not damage the IC.

  • The white area of the module is the reference area for contact with metal beams.

  • Supports Arduino IDE programming and provides runtime libraries to simplify programming.

  • Supports mBlock graphical programming, suitable for users of all ages.

  • Uses RJ25 ports for convenient wiring.

  • Modular installation, compatible with the Lego series.

  • Equipped with connectors to support the vast majority of Arduino-series main control boards.

Operating voltage5V DC
Operating temperature-25 to +80°C
Measurement angleWithin 30 degrees
Measurement range3–400 cm (error less than 1 cm)
Ultrasonic frequency42 kHz
Control methodSingle digital pin control
Module dimensions56 x 36 x 31 mm (length x width x height)




Supplier Information

Company:Robots gift store

Email:[email protected]

Tel:13273966089

Recommended products

Intelligent Programmable Robot Car Kit (8-in-1) with Ultrasonic Sensor – Authentic Imported Educational Toy for Kids

Explore STEM learning with the Robotics Smart Machines kit. Build and program smart robot cars featuring ultrasonic sensors and interactive functions, perfect for kids and tech lea

collect:0

ReBotz Skater: STEM kit with 13 pieces. Easy to build, cruises on a skateboard. Build a quirky motorized robot!

ReBotz Skater: A 13-piece STEM experiment kit that is easy to build. Cruise smoothly on a skateboard and build a quirky motorized robot!

collect:0

Switcheroo Coding Crew: 3in1 Transform Robot Screen-free STEM coding toy, 3 vehicles in 1, obstacle-evading adventures!

Switcheroo Coding Crew (3in1): Screen-free STEM robot toy. Transform into 3 vehicles, dodge obstacles, and build early coding skills. Fun adventures for kids 4+!

collect:0

SumoBot STEM Educational Building Robot Toy, Mechanical Gear System, Real Motorized Movement for Kids

Build your own Clementoni SumoBot! This STEM robotics kit features real motorized gear mechanics, hands-on assembly, and active movement—ideal for kids learning engineering.

collect:0