Product Description
X8 G2
The Next Generation of Integrated Drone Propulsion
Suitable for Various Scenarios, Including Agriculture, Education and Training,
Logistics, Firefighting, Surveying, and Inspection
The brand-new generation X8 G2 is originated from the mature X8 integrated propulsion system refined through years of market experience. It not only builds on the reliable experience accumulated from extensive practical agricultural applications, but also incorporates cutting-edge technologies to meet the evolving needs of industries such as logistics, training and education, delivering a comprehensive upgrade in both functionality and performance.
Powerful Thrust &
High-speed Flight
A single-axis The maximum flight The maximum flight
rated thrust of speed reaches up to speed has increased by
5-7.5kg 20m/s 40%
Functional Features
Paired with the all-new
MFP 30x11S
folding propeller
X8 Weight (incl. prop)1150g
X8 G2 Weight (incl. prop)1095g
The X8 G2
reduces weight by5%
while retaining the X8’s
maximum thrust advantage
A high-speed flight of 20m/s can increase the drone's flight endurance by approximately10%
without changing the battery capacity of the entire drone.
(*Based on internal test data from HOBBYWING, comparative calculation of battery capacity consumption over the same flight distance was obtained at forward flight speeds of 12 m/s and 20 m/s on a quadcopter flying at sea level in 34 °C ambient temperature, both no-load and at rated payload. Actual results may vary with different airframe configurations, battery models, and test conditions, for reference only.)
The X8 power system is proven in the market with a large user base. The new-generation X8 G2 features backward-compatible arm mounting interface. Existing X8 users can upgrade with minimal tuning for assembly, flight controller matching and flight test, while new users can directly access its excellent performance.
MFP 30x11S (with hub) and MFP 30x11 (with hub) fit both X8 generations with identical mounting holes and can be mixed on one aircraft. Note: The two blades have different single weight. Do NOT use them on the same hub, otherwise imbalance will cause vibration or shaft breakage.
Easy-to-assemble Kit
Overall Device Installation
Flight Controller Matching Flight Operation Settings
Product Performance
Multiple Parameter Adjustment Modes for Easy Use
Users can adjust the drive parameters, motor rotation direction, LED color, and other
settings via the remote controller or DataLink software, optimizing flight performance
based on application needs. Additionally, the dedicated OTA function of the DataLink
host computer software facilitates efficient multi-ESC firmware upgrades in one drone.
Real-time Data Interaction & Dual Throttle Redundancy Control
The newly added CAN interface enables real-time data exchange with the flight controller system, allowing users to monitor critical flight parameters (such as speed, throttle, current, voltage, temperature) for rapid data analysis and response, enhancing flight safety.
The dual throttle control solution integrates CAN bus digital signals and PWM analog signals, improving real-time response and anti-interference capabilities to further enhance flight safety.
Note: The system is reserved for customized DShot digital throttle and corresponding protocol compatibility, meeting the demand for FPV adapting to larger drone frame, and enabling rapid building of the drone system.
The product supports DroneCAN and HWCAN (default) protocols. It also enables intercommunication with multiple mainstream flight controller systems, such as ArduPilot open source ecosystem, VK, Byaero, Jiyi, and Borui to build an intelligent flight ecosystem through CAN communication.
Independent Black Box
Supports up to 20 hours of operation data storage
Independent Black Box
The X8 G2 comes with a new log feature and supports up to 20 hours of operation data storage. In case of abnormal conditions, users can access the data via the host computer software (DataLink) for fast fault diagnosis and troubleshooting.
Structural Design
Reliable Structural Design for Consistent Performance
Building on the X8’s optimized structural design, the X8 G2 incorporates aluminum alloy tube clamp and base, a reinforced internal beam, and a triple interlocking structure. This robust design reduces weight while enhancing protection for motor components, ensuring exceptional resistance to drops and impacts for the overall propulsion system, without worrying about intense vibrations during high-speed flights.
Aluminum alloy tube clamp
Aluminum alloy base
A triple interlocking structure
A reinforced internal beam
Superior Protection
Ultra-Strong Protection for Effortlessly Conquering Harsh Environments
The X8 G2 motor is coated with high-temperature resistant enamel wire, capable of withstanding temperatures up to 200℃. With an ingress protection rating of IPX6 and a liquid drainage channel design, it ensures stable performance even during high-speed operations. After use, the motor can be rinsed with water, making it ideal for harsh operating environments commonly encountered in drone applications, such as rain,pesticide mist, high temperatures, and dust.
High-temperature resistant enamel wire, which is capable of withstanding temperatures up to 200℃
The ingress protection is IPX6
Ideal for harsh operating environments commonly encountered in drone applications, such as rain, pesticide mist, high temperatures, and dust.
Dustproof Test: IPX6 Standard
Structural Design of Liquid Discharge Channel
A liquid drainage
channel
Product parameters
X8 G2 Propulsion System-D35 CAD

X8 G2 Propulsion System-D40 CAD

Specifications | Item | Parameter |
Product Name | X8 G2 Propulsion System | |
Model | X8 G2 | |
Max thrust | 17.5 kg (Sea level) | |
Recommended takeoff weight per axis | 5~7.5kg (Sea level) | |
Efficiency of recommended takeoff weight | 9.7~8.4 g/W | |
Compatible lithium battery | 12S~14S (LiPo) | |
Rated voltage | 14S-54V / 12S-46V | |
Input voltage | 18~63 V | |
Tube outer diameter | D35 / D40mm | |
Weight (with cable and Props) | 1095 g* | |
Cable specification | Power cable: 14AWG 905 mm* Signal cable: 915 mm* | |
Operating temperature | -20~50℃ | |
Ingress Protection | IPX6 | |
Rated output power (Max continuous) | 810 W | |
Pinout | Black-GND, White-PWM & Yellow-GND, Gray-CH, Green-CL | |
DataLink Version | DataLinkBox G3 | |
ESC specification | Item | Value |
Model | 80A-FOC | |
Communication protocol | Cyphal(UAVCAN) | |
Peak current(3 seconds) | 80A(3s) | |
Continuous current | 20 A | |
Throttle travel calibration | Nonsupport | |
Double throttle signal | PWM + CAN | |
Operating pulse width | 1050~1950 μs | |
Failure storage & Log | Supported | |
Motor specification | Item | Value |
Model | 8120-100KV | |
Slot&Pole | 36N40P | |
Stator diameter | 81*20 mm | |
Motor diameter | 88.6 mm | |
Propeller specification | Item | Value |
Model | MFP 30x11S (Folding propeller) | |
Total Weight | 193 g* | |
Material of blades | Carbon fiber reinforced plastics | |
Single blade weight | 54.5 g* | |
Optional Propeller specification | Item | Value |
Model | MFP 30x11 (Folding propeller) | |
Total Weight | 188 g* | |
Material of blades | Carbon fibre-reinforced nylon composite material | |
Single blade weight | 51.6 g* |
*Subject to the actual product. Two types of propellers available, MFP 30x11S high speed propeller is mainly used.
X8 G2-12S & MFP 30x11S Load performance parameters

X8 G2-12S & MFP 30x11S Technical Parameters
Voltage(V) | Propeller | Throttle(%) | Thrust(g) | Current(A) | Power Input(W) | Speed(RPM) | Efficiency(g/W) | Torque(N·m) | Power Output(W) | Temperature(℃) |
46V(12S LiPo) | MFP 30x11S / MFP 30x11 | 35% | 2021 | 3.5 | 161.2 | 1571 | 12.5 | 0.74 | 121.7 | / |
39% | 2472 | 4.4 | 204.0 | 1721 | 12.1 | 0.89 | 160.4 | |||
42% | 2968 | 5.6 | 256.5 | 1877 | 11.6 | 1.06 | 208.3 | |||
45% | 3493 | 6.9 | 317.3 | 2032 | 11.0 | 1.24 | 263.8 | |||
48% | 3999 | 8.3 | 380.4 | 2171 | 10.5 | 1.41 | 320.5 | |||
51% | 4476 | 9.6 | 443.5 | 2294 | 10.1 | 1.58 | 379.5 | |||
54% | 4994 | 11.2 | 515.8 | 2419 | 9.7 | 1.76 | 445.8 | |||
57% | 5456 | 12.7 | 583.9 | 2524 | 9.3 | 1.92 | 507.4 | |||
60% | 6043 | 14.6 | 674.2 | 2650 | 9.0 | 2.12 | 588.3 | |||
63% | 6452 | 16.1 | 740.0 | 2733 | 8.7 | 2.26 | 646.8 | |||
66% | 6977 | 18.0 | 828.9 | 2836 | 8.4 | 2.45 | 727.6 | |||
69% | 7951 | 21.8 | 1004.4 | 3017 | 7.9 | 2.79 | 881.4 | |||
72% | 8500 | 24.1 | 1110.3 | 3115 | 7.7 | 2.99 | 975.3 | |||
75% | 9050 | 26.5 | 1221.7 | 3212 | 7.4 | 3.18 | 1069.5 | |||
78% | 10034 | 31.2 | 1434.5 | 3384 | 7.0 | 3.55 | 1257.9 | |||
81% | 10467 | 33.3 | 1533.5 | 3459 | 6.8 | 3.71 | 1343.8 | |||
84% | 11007 | 36.1 | 1660.6 | 3553 | 6.6 | 3.92 | 1458.4 | |||
87% | 11548 | 38.9 | 1792.3 | 3646 | 6.4 | 4.13 | 1576.8 | |||
90% | 12542 | 44.4 | 2042.8 | 3813 | 6.1 | 4.51 | 1800.7 | |||
100% | 15006 | 57.7 | 2658.5 | 4132 | 5.6 | 5.35 | 2314.8 |
The above data was measured by HOBBYWING Laboratory at room temperature 25°C, at sea level, with varying throttle input adjustments. The test data of two types of propellers are the same.
X8 G2-14S & MFP 30x11S Load performance parameters

X8 G2-14S & MFP 30x11S Technical Parameters
Voltage(V) | Propeller | Throttle(%) | Thrust(g) | Current(A) | Power Input(W) | Speed(RPM) | Efficiency(g/W) | Torque(N·m) | Power Output(W) | Temperature(℃) |
54V(14S LiPo) | MFP 30x11S / MFP 30x11 | 35% | 4459 | 8.4 | 451.4 | 2250 | 9.9 | 1.58 | 372.3 | / |
39% | 4965 | 9.7 | 524.4 | 2371 | 9.5 | 1.75 | 434.5 | |||
42% | 6007 | 12.7 | 688.6 | 2602 | 8.7 | 2.12 | 577.6 | |||
45% | 6450 | 14.1 | 763.2 | 2694 | 8.5 | 2.28 | 643.2 | |||
48% | 7031 | 16.0 | 864.8 | 2810 | 8.1 | 2.48 | 729.7 | |||
51% | 8026 | 19.4 | 1048.4 | 2995 | 7.7 | 2.83 | 887.5 | |||
54% | 8552 | 21.3 | 1149.4 | 3088 | 7.4 | 3.02 | 976.5 | |||
57% | 9509 | 24.8 | 1342.4 | 3248 | 7.1 | 3.35 | 1139.4 | |||
60% | 10495 | 28.7 | 1552.8 | 3403 | 6.8 | 3.70 | 1318.4 | |||
63% | 11062 | 31.1 | 1680.3 | 3489 | 6.6 | 3.89 | 1421.2 | |||
66% | 12045 | 35.4 | 1912.8 | 3633 | 6.3 | 4.24 | 1613.0 | |||
69% | 12992 | 39.9 | 2152.8 | 3766 | 6.0 | 4.57 | 1802.2 | |||
72% | 13506 | 42.4 | 2290.0 | 3836 | 5.9 | 4.76 | 1912.0 | |||
75% | 14456 | 47.3 | 2555.3 | 3962 | 5.7 | 5.10 | 2115.8 | |||
78% | 14984 | 50.2 | 2710.3 | 4031 | 5.5 | 5.29 | 2232.9 | |||
81% | 15544 | 53.3 | 2879.3 | 4101 | 5.4 | 5.49 | 2357.5 | |||
84% | 16017 | 56.0 | 3025.6 | 4160 | 5.3 | 5.67 | 2469.9 | |||
87% | 16518 | 59.0 | 3184.3 | 4219 | 5.2 | 5.85 | 2584.4 | |||
90% | 17005 | 61.9 | 3340.3 | 4276 | 5.1 | 6.02 | 2695.6 | |||
100% | 17464 | 64.7 | 3489.8 | 4326 | 5.0 | 6.18 | 2799.4 |
The above data was measured by HOBBYWING Laboratory at room temperature 25°C, at sea level, with varying throttle input adjustments. The test data of two types of propellers are the same.
Protection Mechanism
Multiple Protection Mechanisms for Secure Flights
The system integrates various software and hardware protection mechanisms, including over-current, motor stall, throttle loss, temperature anomaly monitoring, and over/under-voltage protection, ensuring comprehensive safety during flight.
(This protection function can be enabled or disabled as needed, allowing flexible configuration based on the requirements of the overall system.)
Contact Us
Contact Us | One-stop Procurement Consultation
We have professional sales and technical teams to respond to your inquiries promptly.
We provide product selection, custom solutions, sample testing, bulk supply and after-sales technical support.
Please send your requirements for latest quotation and product datasheets.
📞 WhatsApp:+86 13673532183
📩 Contact Email:[email protected]
FAQ
Can you offer Customized service?
Yes, we do both OEM and ODM.
What about the lead time for mass production?
It depends on the order quantity. If 2000pcs, it takes about 10-15days.
What's your payment terms?
We accept T/T, Western Union, Paypal and MoneyGram, those depend on specific cases.
Why choose you?
This is Hobbywing direct store. Must offer you Best Price and Reliable Service.
We have 20+ years experience of Permanent magnet brushless DC motor and ESC in manufacturing and R&D.
How to get the price?
ODM: Pls tell us your interested model and demand quantity, we will offer good price.
OEM: Pls tell us the details: size, quantity, printing/package etc request, we will calculate good price for you.
How can we guarantee quality?
Always a pre-production sample before mass production.
Always final Inspection before shipment.










