Product Description
Guessing dice game electronic kit
When switched on, the 7 LEDs randomly display a number.
The player presses switch S1 and all 7 LEDs change; after a few seconds the LEDs start flashing until a stable number is displayed.
Five LED colours available:
Red LED、Blue LED、White LED、Yellow LED、Green LED
Functional Features
Main features:
·7 LEDs indicate dice points 1 to 6;
press S1 and the LEDs flash before settling on a stable number
·Five LED colours available: red, blue, white, yellow and green
·An NE555 multivibrator generates the pulses and a CD4017 decade counter outputs in turn, driving the 7 LEDs
·Silkscreen markings printed on the PCB make it ideal for soldering practice and electronics beginners
·Supplied as a bare kit, with battery holder or power cable options
1. Power supply
2. Pay attention to the direction of the U-port
3. Resistance
4. Transistor
5. LED lights
6. Electrolytic capacitors
7. Ceramic capacitors
8.555 1C (note U-port direction)
9. Switching power supply
1. Component silkscreen markings are printed on the PCB; solder according to these markings.
2. Resistors have no polarity but differ in value; take care to tell them apart when soldering.
3. Electrolytic capacitors and LEDs are polarised: the long lead is positive (+) and the short lead is negative (-).
4. When connecting the power cable to the terminal block, observe the polarity and do not reverse it.
Circuit principle:
The circuit mainly consists of a pulse generator and a decade counter.
The pulse generator, built from an NE555 and its peripheral components, forms a multivibrator.
When button S1 is pressed, Q1 conducts and pin 3 of the NE555 outputs pulses, so the outputs of the CD4017 switch to high level in turn; through different combinations of resistors and transistors the 7 LEDs are driven to light up and indicate points 1 to 6.
Dimensional Drawin
Product parameters
Parameter | Value |
Product name | Guessing dice game electronic kit |
Working voltage | DC 5V |
Dimensions | 74MM*35MM |
PCB material | Double-sided 1.6MM RF-4 board |
LED colours | Red / white / yellow / blue / green |
LEDs | 7 pcs |
Component List
Component | Parameters | PCB Marking |
Resistor | 470R | R8 R9 R10 |
1K | R7 | |
10K | R3—R6 R12—R16 | |
3.3M | R2 | |
4.7M | R11 | |
10M | R1 | |
Capacitor | 104P | C2 |
1UF/50V | C1 | |
LED | φ5 red | D1—D7 |
Tactile switch | 6*6*5 | S1 |
Transistor | S8050 | Q2 Q4 Q5 |
S8550 | Q1 Q3 | |
IC | NE555 | U1 |
CD4017 | U2 | |
Terminal block | XH2 54 2P vertical | J1 |
Power cable | XH 2P single head | 1 |
PCB | FR-4 | 35MM*74MM |










