Product Description
A line-following educational robot kit built on the LegoDuino Pro UNO (Arduino compatible), equipped with line tracking, ultrasonic, infrared remote, fan and voice broadcast modules for line following, obstacle avoidance and maze solving.
Suitable for maker and programming education.
Basic Function Introduction
1. Tracking module
The QTR-5RC line sensor supports line tracking, maze solving and other functions.
2. Ultrasonic module
Distance detection enables obstacle avoidance, following, maze solving and other functions.
3. Infrared remote control
An infrared receiver module enables infrared remote control of the car.
4. RGB lights
Cool lighting effects accompany the car in motion; the desired colour can be shown according to values from other modules.
5. Fan module
The fan module blows out flames where there is fire; a flame module can be added to detect the fire source.
6. Voice broadcast
The module can announce whether there is an obstacle, the driving direction, colour, distance and more.
Introduction to the main control board
LegoDuno Pro can be adapted to Arduino
Main control chip: ATMega328P
Communication chip: CH340G
Working voltage: 5V
Input voltage: 3.7V
Digital I/O pins: 14 (6 supporting PWM)
Support Arduino IDE compilation software
Support Mixly/Mind+graphical programming
Expandable functions
1. Colour recognition
2. OLED display
3. Gesture recognition
4. Gamepad remote control
Packing List
NO. | Item | Qty/pcs | Remarks |
1 | Line-following & maze car | 1 | |
2 | WS2812 lights | 1 | |
3 | Fan module | 1 | |
4 | Ultrasonic sensor | 1 | |
5 | Voice broadcast module | 1 | |
6 | Infrared receiver | 1 | Remote control included |
7 | LEGO accessory pack | 1 | |
8 | Line-following map | 1 | |
9 | PH2.0-4P cable | 5 | |
10 | M3 flat-head screws | 2 |
Dimensional Drawin
Product parameters
Parameter | Value | Parameter | Value |
Dimensions | 112*95*85mm | Regulated supply | 5V |
Weight | 180g | Input voltage | 3.7V |
Ground clearance | 4mm | Output voltage | 5V |
Steering | Turn in place, differential steering | Motor model | N20 geared motor |
Main board | LegoDuino Pro UNO | Motor speed | 85rpm |
Driver | DRV8833 (5V1.2A) / dual-channel | Gear ratio | 1:150 |
Charging | Micro-USB (5V 0.5-2A) | Rated current | 0.06A |
Runtime | More than 3 hours | Motor power | 0.3W |
Charging time | About 110 minutes (5V1A) | Reference speed | 0.18m/s |
Sensors | Line tracking sensor, IR remote, fan module, RGB lights, ultrasonic module, voice broadcast | ||










