Product Description
Most
Advanced
Cube yet!
The world′s most advanced autopilot for open autonomous
unmanned vehicles. Redundant, temperature controlled, isolated.
Functional Features
Equipped with High Performance H7 Processor
H7 has a Cortex M7 with double-precision (DP) FPU, 400MHz CPU, A Cortex M4 running at 200 MHz, 2MB of Flash, and 1MB RAM, this Dual core architecture provides high performance and stable solution for flight. Fully ArduPilot and PX4 supported.
ARM Cortex M7+M4 ARM Cortex M3
STM32H757 STM32F100
M7 DP-FPU + M4 SP-FPU CPU failsafe co-processor
Flash 2MB RAM 1MB FLASH 64KB RAM 8KB
Situational Awareness by Integrated ADS-B
A 1090MHz customized ADS-B receiver from uAvionix has been integrated into the ADS-B carrier board. UAVs equipped with the ADS-B carrier board can receive attitude and location of commercial manned aircraft within the range of Cube. Using the Advanced Auto avoidance features within Ardupilot, ADS-B assists in keeping our skies safe.
New Sensors on upgraded IMU
Real-time triple redundant IMU system on the flight controller provides backups if errors occur, enhancing safety and reliability. Cube orange+ will come in two configurations. Early units will have an ICM42688, and ICM20948, and the ICM20649, followed by an upgrade to Dual ICM42688, and the all new ICM45686 Balanced Gyro. This second configuration will be the long term configuration.
Barometer
16G Accelerometer 2000 DPS Gyroscope 30G Accelerometer 4000 DPS Gyroscope
16G Accelerometer 2000 DPS Gyroscope Magnetometer
Barometer
Easy switching on PWM output signal voltage
PWM output signal levels can be switched from 3.3V to 5V signal levels. Voltage switching is via a simple parameter change. This provides the ability to provide a larger margin on signaling in some difficult configurations of aircraft on external peripherals.
Temperature Stabilised IMU
Isolating the system from excessive vibration
AOM AUTOPILOT-ON-MODULE®
Customised carrier boards can be optimised for specific applications
Support for multiple vehicle types
Including Helicopter, Multicopter, Fixed Wing, VTOL, Rover, Boat, Submarine, etc
Fixed wing Multicopter
Boat VTOL
Rover Submarine
Dimensional Drawin

Product parameters
Hardware specification | |
Main Processor | STM32H757 Dual Core M7 + M4 |
Coprocessor | STM32F100 |
Supported RC signals | PPM/SBUS/DSM |
Power redundancy | Triple redundancy |
Sensors | Triple IMU System |
Sensors details | IMU1(Isolated) ICM42688 |
IMU2(Isolated) ICM20948 or ICM42688 | |
IMU3(Fixed) ICM20649 or ICM45686 | |
MS5611 x 2(Baro) | |
Supported firmware | Ardupilot, PX4, and Hionos DO-178C |
Supported vehicle types | Fixed-wing plane |
Multicopter | |
Helicopter | |
VTOL-plane | |
VTOL-plane Rover/boat/submarine | |
Specification | |
Weight | 73g |
Chassis Material | CNC Aluminum Alloy(cube)+ABS Molding(Carrier Board) |
Size | cube 38.4x38.4x22mm |
Carrier Board 94.5x44.3x17.3mm | |
Operating temperature | -10~+55° IMU with temperature control |
PWM I/Os | 14 |
Mavlink serial interface | 4 |
Number of GPS supported | 2 |
Debug interface | 2 |
I2C interface | 2 |
CAN interface | 2 |
Features | |
Supports multiple modes such as Loiter, Altitude Hold, AUTO(With Waypoints), Guide mode, etc | |
Supports Mission Planner and QGroundControl ground control stations | |
Built-in flight logging | |
Extensibility | |
Supports companion computers such as NVIDIA, Raspberry Pi,etc | |
Supports OSD | |
Protection Function | |
Smart RTL | |
battery low protection | |
Geo-Fencing | |
RC signal protection | |
Pin Definition

Accessory Details
Packing Box x1
Cube Orange Set x1

Power Module x1 Buzzer x1 CAN Cable x2 I2C Cable x2
Recommended: 2S-6S (Max 8S)

Power Cable x2 GPS1 Cable x1 Telem Cable x2 I2C Board x1

Hexagon Round Head Screws x4 Large 3M Tape x3 Medium 3M Tape x2 Small 3M Tape x4
Contact Us
Contact Us
Please feel free to contact us for Pixhawk cube orange quotation, technical documents, bulk order, OEM service, GPS / power module matching consultation. We provide professional technical support, after-sales guidance and fast shipment.
📞 WhatsApp:+86 13673532183
📩 Contact Email:[email protected]
FAQ
Q1: What firmware does Cube Orange support?
A: It natively supports open-source ArduPilot and PX4 firmware, compatible with multirotor, fixed-wing, VTOL, rover and boat.
Q2: Is GPS included in the set?
A: GPS module is not included by default. Please check the packing list on product page, GPS is optional.
Q3: What is the input voltage range?
A: Recommended 2S–6S LiPo battery. Do NOT overvoltage, otherwise the flight controller will be damaged.
Q4: Will wiring diagram and guides be provided?
A: Official wiring manual and basic setup documents will be provided after order. One-on-one remote tuning service is not included.
Q5: Can it be used for commercial, agricultural or inspection drones?
A: It is open-source hardware for secondary development, widely used in agriculture, inspection, mapping and rescue projects. User needs to finish adaptation and tuning.










