Product Description
Pixhrzwk® 6C
The Most Advanced Pixhawk
Autopilot Flight Controller
with H7 Processor
Power Module Options
01 PM02 V3 Module
- Module Size: —
- Module Weight: 20 g
- Max Supported Current: 120 A
- Max Supported Voltage: 7–51 V (2~12S LiPo)
- Advantages: Single power output, compact design, ideal for small drones
02 PM07 Power Module
- Module Size: 68*50*8 mm
- Module Weight: 36 g
- Max Supported Current: 120 A
- Max Supported Voltage: 7–51 V (2~12S LiPo)
- Advantages: Dual power supply, integrated PWM input port
Flight Controller Selection
01 Pixhawk 6C with Metal Case
- Controller Weight: 46 g
- Controller Dimensions: 44×84×12 mm
- Advantages: Metal housing, pressure & drop resistant, excellent thermal conductivity
02 Pixhawk 6C with Plastic Case
- Controller Weight: 31 g
- Controller Dimensions: 44×84×12 mm
- Advantages: Lighter weight, cost-effective
Note:
The metal case and plastic case differ only in housing material; the main board is identical.
Functional Features
Pixhawk® 6C

Flight Controller
Pre‑flashed with PX4 Autopilot
Based on Pixhawk FMUv6C open standard and connector standard
Sensor Technology from Bosch®
and InvenSense®

Gyroscope-ICM‑42688‑P, BMI055
Magnetometer-IST8310
Barometer-MS5611
- FMU: STM32H743
- Operating Frequency: 480 MHz
- IMU: ICM‑42688
- High‑Performance IMU
- Redundant Multi‑Sensor Design
- Integrated Vibration Isolation System
Newly Designed Integrated
Vibration Isolation System

Filters out high‑frequency vibration,
reduces noise and guarantees accurate readings
FMU Processor
STM32H743

The H7 microcontroller of Pixhawk® 6C features an Arm® Cortex®‑M7 core running up to 480 MHz, with 2 MB Flash and 1 MB RAM.
Boosts productivity and efficiency for development work
Dimensional Drawin

Product parameters
Item | Specifications |
FMU Processor | STM32H743, 32bit ARM® Cortex®M7, 480 MHz, 2 MB Flash, 1 MB SRAM |
IO Processor | STM32F103, 32bit ARM® Cortex®M3, 72 MHz, 64 KB SRAM |
Onboard Sensors | Accel/Gyro: ICM42688P, BMI055 |
Magnetometer: IST8310 | |
Barometer: MS5611 | |
Rated Voltage | Max Input Voltage: 6 V |
USB Input: 4.75~5.25 V | |
Servo Input: 0~36 V | |
Current Ratings | Max output of TELEM1: 1.5 A |
Combined limit for all other ports: 1.5 A | |
Dimensions | 84.8 * 44 * 12.4 mm |
Weight | Aluminum case: 59.3 g|Plastic case: 34.6 g |
Application wiring diagram

Accessories
Accessories & Packaging
The pictures below are for illustration. Please select the corresponding kit as required.
Flight Controller GPS (Optional)
1x Pixhawk 6C 1x M9N GPS 1x M10 GPS

![]()
Power Module (Optional)
1x PM02 12S 1x PM06 14S 1x PM07 14S

![]()
Cable Pack
2x PWM Board 1x CAN / I2C Splitter
3x GHR 1.25mm 4 to 4 pin cable (CAN&I2C) 5x GHR 1.25mm 6 to 6 pin cable (Power&TELEM)
2x GHR 1.25mm 10 to 10 pin cable (PWM) 1x SH 1.0mm 10 to 10 pin cable (Debug)
1x GHR 1.25mm 3 to DuPont 2.54 3 pin cable (SBUS OUT) 1x GHR 1.25mm 5 to DuPont 2.54 3 pin cable (RC)
1x Type-c USB cable
Contact Us
Contact Us
Please feel free to contact us for Pixhawk 6C quotation, technical documents, bulk order, OEM service, GPS / power module matching consultation. We provide professional technical support, after-sales guidance and fast shipment.
📞 WhatsApp:+86 13673532183
📩 Contact Email:[email protected]
FAQ
Q1: Does Pixhawk 6C support PX4 and ArduPilot firmware?
A1: Yes, it comes with PX4 pre-installed. ArduPilot is also available by re-flashing. Only one firmware can run at a time.
Q2: Can it work with M9N / M10 GPS and PM02 / PM06 power module?
A2: Yes. GPS and power modules are optional accessories. Please select the kit you need.
Q3: What vehicles is it suitable for?
A3: It works for quadcopter, multirotor, fixed wing and VTOL drones.
Q4: Is SD card included?
A4: SD card is NOT included. You need to buy it separately for flight log storage.
Q5: Can you provide technical configuration support?
A5: We supply basic documents and support. For advanced tuning, please refer to official PX4 docs.
Q6: Can I order samples and bulk goods?
A6: Sample order is acceptable. Better price for large quantity. Please contact us for quotation.










