Product Description
pixhawk® 6X
Standard Baseboard V2
» New & Slimmer Design » Two Models Available » New & Improved Pin Header
Functional Features
Internal Architecture
All-New Vibration Isolation System
Custom-Formulated Isolation Material for
Optimal IMU Damping Characteristics and
Superior Durability
IMU Board
Triple Redundancy Domains
All Sensor on Seperate Bus
Triple Redundant IMU 2X Barometer
Modular Design
Pixhawk Autopilot Bus
Pixhawk Bus Standard pixhawk® 6X
Mini Baseboard
Standard Baseboard
Raspberry Pi CM4 Baseboard
Pixhawk Jetson Baseboard
Your Own Customized Baseboard
IMU Board
» Temperature Compensation Resistors to Ensure IMU accuracy
» Redundant IMU & Barometer
» Sensor Technologies from Various Sensor Manufacturers
» IMU Board Enclosed in Specially Formulated Isolation Material
MU Board
» Pixhawk Autopilot Bus Connector Standard
» STM H753 32-Bit Processor @ up to 480 MHz
» Invensense ICM45686 IMU with BalancedGyro™ Technology
» NXP EdgeLock SE050 Secure Element
Sensor Redundancy Architecture
» 3x IMU
» 2x Barometer
» 1x Magnetometer
Pixhawk mini Pixhawk Baseboard v1 Pixhawk Baseboard v2A Pixhawk Baseboard v2B
Technical Specification
Processors & Sensors
- FMU Processor: STM32H753
- 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
- On-board sensors (Shipping Currently, Rev8)
- Accel/Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
- Barometer: ICP20100 & BMP388
- Mag: BMM150
- On-board sensors (Previous Revision, Rev3/4)
- Accel/Gyro: BMI088/ICM-20649
- Accel/Gyro: ICM-42688-P
- Accel/Gyro: ICM-42670-P
- Barometer: 2x BMP388
- Mag: BMM150
Electrical Data
Item | Specification |
Max Input Voltage | 6V |
USB Power Input | 4.75~5.25V |
Servo Rail Input | 0~36V |
Telem1 Output Current Limiter | 1.5A |
All Other Ports Combined Output Current Limiter | 1.5A |
Mechanical Data
Item | Model | Dimensions (mm) | Weight |
Flight Controller Module | FC Module | 38.8 × 31.8 × 14.6 | 23g |
Standard Baseboard | Standard Baseboard | 52.4 × 103.4 × 16.7 | 51g |
Mini Baseboard | Mini Baseboard | 43.4 × 72.8 × 14.2 | 26.5g |
Interfaces
Interface Category | Qty | Specification |
PWM Servo Outputs | 16 | Hardware switchable 3.3V or 5V signal mode (requires baseboard modification) |
R/C Input (Spektrum/DSM) | 1 | Spektrum / DSM receiver input |
Dedicated R/C Input | 1 | PPM and S.Bus input |
RSSI / S.Bus | 1 | Dedicated analog / PWM RSSI input and S.Bus output |
General Purpose Serial Ports | 4 | 3 with full flow control |
GPS Ports | 2 | 1 full GPS plus Safety Switch Port |
I2C Port | 1 | Standard I2C port |
Ethernet Port | 1 | Transformerless applications (AN2190 50 Ohm termination) |
SPI Bus | 1 | 2 chip select lines |
CAN Buses | 2 | For CAN peripheral |
Power Input Ports | 2 | With SMBus |
AD & IO Port | 1 | 2 additional analog inputs |
Product parameters
Item | Pixhawk 6X | ||
Product Photos |
|
|
|
Flight Controllers | Pixhawk 6X | Pixhawk 6X New | Pixhawk 6X Pro |
FMU Processor | STM32H753 | ||
IO Processor | STM32F103 | ||
Accel/Gyro | BMI088 | 3x ICM-45686 | ADIS16470 |
ICM-42688-P | IIM-42652 | ||
ICM-42670-P | ICM-45686 | ||
Barometer | 2x BMP388 | ICP20100 & BMP388 | ICP20100 & BMP388 |
Mag | BMM150 | ||
Dimensions | 38.8 × 31.8 × 14.6mm | 38.8 × 31.8 × 16.8mm | 38.8 × 31.8 × 30.1mm |
Weight | 23g | 31.3g | 50g |
Adaptable products | 1. Pixhawk Standard Baseboard | ||
2. Pixhawk Mini Baseboard | |||
3. Pixhawk RPi CM4 Baseboard | |||
4. Pixhawk Jetson Baseboard | |||
Application wiring diagram


Contact Us
Contact Us
Please feel free to contact us for Pixhawk 6X quotation, technical documents, bulk order, OEM service, GPS / power module matching consultation. We provide professional technical support, after-sales guidance and fast shipment.
📞 WhatsApp:+86 13673532183
📩 Contact Email:[email protected]
FAQ
Q1: What firmware does Cube Orange support?
A: It natively supports open-source ArduPilot and PX4 firmware, compatible with multirotor, fixed-wing, VTOL, rover and boat.
Q2: Is GPS included in the set?
A: GPS module is not included by default. Please check the packing list on product page, GPS is optional.
Q3: What is the input voltage range?
A: Recommended 2S–6S LiPo battery. Do NOT overvoltage, otherwise the flight controller will be damaged.
Q4: Will wiring diagram and guides be provided?
A: Official wiring manual and basic setup documents will be provided after order. One-on-one remote tuning service is not included.
Q5: Can it be used for commercial, agricultural or inspection drones?
A: It is open-source hardware for secondary development, widely used in agriculture, inspection, mapping and rescue projects. User needs to finish adaptation and tuning.













